Filter
Top Products
35
Computer Input
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This projec-
tor has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The pro-
jector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the
setting for a specific computer whenever you use it.
Select the PC Adjust Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
1
2
Select an item with the Point Up/Down button and press the
Point Left/Right button to adjust each item.
PC Adjust Menu
Adjusts an image as necessary to eliminate flicker from the display.
Press the Point Left/Right button to adjust value. (From 0 to 31)
Fine sync
Adjusts the number of total dots in one horizontal period. Press the
Point Left/Right button and adjust number to match your PC image.
Total dots
Adjusts horizontal picture position. Press the Point Left/Right button
to adjust the position.
Horizontal
Adjusts vertical picture position. Press the Point Left/Right button to
adjust the position.
Vertical
Press the Point Right button to show the information of the connect-
ed computer.
Current mode
Adjusts clamp level. When the image has dark bars, try this adjust-
ment.
Clamp
Shows status
(Stored / Free) of the
selected Mode.
Selected Mode
Computer Adjustment (Manual)
Go on to the next page...
Press the SELECT button to
adjust the next item.
Press the MENU button to
return to the previous On-
Screen Menu and store the
adjusted value.
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
Computer Input