Filter
Top Products
25
Video Input
Input 2
Input 1
INPUT button
Input Source Selection (INPUT 2 Terminal / Component, RGB Scart)
Choose Input 2 by pressing the INPUT button on the top control or on
the remote control. Before using these buttons, correct input source
should be selected through menu operation as described below.
Direct Operation
MENU
INPUT
SELECT
LAMP
MENU
SCREEN
IMAGE ADJ.
SELECT
INPUT
Top Control Remote Control
INPUT button
INPUT button
Select the Input Menu with the Point Up/Down button, and then
press the Point Right button to enter the sub-menu.
Select Input 2 with the Point Up/Down button and then press
the Point Right button. The Source Select Menu will appear.
1
2
Move the pointer to the source that you want to select and then
press the SELECT button.
3
Menu Operation
Input Menu
Source Selection Menu
pointer
Closes the source selection menu.
When the input source is coming from video equip-
ment connected to the D-sub RGB terminal with a
Component cable and a Component-VGA cable,
select Component.
Component
When the input source is coming from video equip-
ment connected to the D-sub RGB terminal with a
Scart-VGA cable, select RGB (Scart).
RGB (Scart)
✔
Note:
• Component cable and Scart-VGA cable are options. See page 58 for order.
Video Input