Filter
Top Products
39
Computer Input
When Digital zoom is selected, the On-Screen Menu disappears and
the message “D.Zoom” is displayed. Press the SELECT button to
expand the image. And press the POINT UP/DOWN/LEFT/RIGHT but-
ton(s) to pan the image. The panning function can work only when
the original image is larger than screen size (960 x 540).
Full
Digital zoom
✔
Note:
• This Screen Menu cannot be operated when “720p (HDTV)”, “1035i (HDTV)”, or
“1080i (HDTV)” is selected in the PC System Menu (p33).
• Digital zoom cannot be selected when “480i”, “575i”, “480p”, or “575p” is selected
in the PC System Menu (p33).
• This projector cannot display any resolution higher than 1280 X 1024. If your com-
puter’s screen resolution is higher than 1280 X 1024, reset the resolution to the
lower before connecting to the projector.
• The image data in other than the resolution (1280 x 1024) is modified to fit the
screen size in initial mode.
• The panning function may not operate properly if the computer system prepared in
the PC Adjust Menu is used.
Provides image to fit screen size.
Normal
True
Screen Menu
Provides image in its original size. When the original image size is
larger than the screen size (960 x 540), this projector enters “Digital
zoom” mode automatically.
Provides an image to fit the horizontal size of the screen.
Screen Size Adjustment
Select the Screen Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Select an item with the Point Up/Down button and press the
Point Left/Right button to set the screen size.
1
2
You can resize the projected screen with pressing the SCREEN button
on the remote control. Each time you press the SCREEN button you
can change the screen size among Normal, Full, True, Digital zoom.
Computer Input
Direct Operation
Menu Operation
LL
LIGHT
LAMP
MENU
SCREEN
SELECT
LAMP
MODE
SCREEN button