Filter
Top Products
6
Safety Instructions
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
–Do not drop or bump a projector, otherwise damages or mal-
functions may result.
–When carrying a projector, use a suitable carrying case.
–Do not transport a projector by using a courier or transport
service in an unsuitable transport case. This may cause dam-
age to a projector. To transport a projector through a courier or
transport service, consult your dealer for best way.
Moving the Projector
When moving the projector, close the front cover and retract
the adjustable feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put
it into a suitable case.
20˚
20˚
Do not tilt the projector more than 20
degrees to either side.
Do not point the projector down to project
an image.
Do not put the projector on either side to
project an image.
Install the projector properly. Improper Installation may reduce
the lamp lifetime and cause a fire hazard.
NO DOWNWARD
NO SIDEWARD
Installing the Projector in Proper Position
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or cov-
ered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 3.0’(1m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent, espe-
cially screws and metallic part. This area will become hot
while the projector is being used.
– Do not put anything on the cabinet. The materials put on
the cabinet will not only get damaged but also cause fire haz-
ard by heat.
Cooling fans are provided to cool down the projector. This
projector monitors internal temperature and control the run-
ning speed of the cooling fans.
Air Circulation
Air Intake Vent
Exhaust Vent
(Hot air exhaust)