Filter
Top Products
18
Connect the projector's AC power cord into an AC outlet and
open the front cover. Turn the Main On/Off switch on, and the
POWER indicator flashes red in a moment and turns on red. (If
the front cover is being closed, the POWER indicator light
orange.)
Press the POWER ON-OFF button on the top control or on the
remote control. The POWER indicator turns green, and the cool-
ing fans start to operate. The preparation display appears on the
screen and the count down starts. (A captured image can be
used as the preparation display. See “Capture” on page 41.)
2
3
Press the POWER ON-OFF button on the top control or on the
remote control, and a message "Power off?" appears on the
screen. The message is not displayed and the projector is
turned off when the Power off confirmation function is off. (See
the Setting Menu on page 41.)
Press the POWER ON-OFF button again to turn off the projec-
tor. The POWER indicator starts to flash red, and it continues
while the cooling fans are operating (for about 90 seconds).
1
2
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PRO-
JECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURN-
ING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE COOL-
ING FANS ARE RUNNING OR BEFORE POWER INDICA-
TOR LIGHTS RED. OTHERWISE IT WILL RESULT IN
SHORTENING LAMP LIFE.
1
3
When the projector has cooled down enough to be turned on
again, the POWER indicator lights red. Then you can turn the
Main On/Off switch off and disconnect the AC power cord.
The message disappears after 4 seconds.
4
After the count-down, the input source that was selected last
and the Lamp mode status icon appear on the screen.
Turning Off the Projector
✔
Note:
• When the front cover is closed during operation, the projector is automatically
turned off in 5 seconds for safety. Be sure to turn off the projector by pressing the
POWER ON-OFF button on the top control or on the remote control after use.
• The projector cannot be turned on during the cooling period with the POWER indi-
cator flashing red. You can turn it on again after the POWER indicator lights red.
• Do not use the projector for more than 24 hours continuously. Turn off the projec-
tor at least once in 24 hours and give it a rest. Continuous use may result in short-
ening the lamp lifetime.
• This projector monitors internal temperature and automatically controls the running
speed of the cooling fans.
• If the WARNING indicator flashes or lights red, see “Warning Indicator” on page 43.
Complete peripheral connections (with a computer, VCR, etc.)
before turning on the projector.
(See page 42 for Lamp mode.)
Selected Input Source and Lamp Mode
Lamp mode
OFF ON
Open the front cover.
Main On/Off switch
Turning On the Projector
Basic Operation