Filter
Top Products
23
Input 1
Input 2
INPUT button
Input Source Selection (INPUT 1 Terminal / Video, S-Video, Component)
Choose Input 1 by pressing the INPUT button on the top control or on
the remote control. Before using these buttons, correct input source
should be selected through the Input button on the remote control or
through menu operation as described on the next page.
Direct Operation
IMAGE ADJ.
SELECT
CLEAR
DARK
VIDEO
INPUT
Top Control Remote Control
INPUT button
Press VIDEO, S-VIDEO, or COMP. button on the remote control
according to video input.
MENU
SCREEN
IMAGE ADJ.
SELECT
USER SETTING
COMPONENT
CLEAR
DARK
U - 1 U - 2
U - 3 U - 4
S-VIDEO
VIDEO
COMP.
PC
INPUT
Remote Control
INPUT buttons
INPUT buttons: VIDEO / S-VIDEO / COMP.
When video input signal is connected to the VIDEO
jack, select Video.
VIDEO
When video input signal is connected to the S-
VIDEO jack, select S-Video.
S-VIDEO
INPUT button
INPUT
SELECT
When video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select Y-Pb/Cb-Pr/Cr.
Y-Pb/Cb-Pr/Cr
(Component)
Video Input
Video Input