Filter
Top Products
45
Disconnect the AC power cord before cleaning.
When the projector is not in use, replace the lens cover.
1
3
2
Follow these steps to clean the projection lens.
Cleaning the Projector Cabinet
Disconnect the AC power cord before cleaning.
1
Softly wipe the projector body with a soft, dry cleaning cloth.
When it is heavily soiled, use a small amount of mild detergent
and finish with a soft, dry cleaning cloth. Avoid using an exces-
sive amount of cleaner. Abrasive cleaners, solvents, or other
harsh chemicals might scratch the surface.
2
Follow these steps to clean the projector cabinet.
When the projector is not in use, put the projector in the carry-
ing case to protect it from dust and scratches.
3
Softly wipe the projection lens with a cleaning cloth that con-
tains a small amount of non-abrasive camera lens cleaner, or use
lens cleaning paper or a commercially available air blower to
clean the lens. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh chemicals might
scratch the surface.
After removing the air filter from the projector as described
above, remove the replacement filter from the holder.
Holds the air filter with both hands, and remove the replacement
filter by pulling it up.
1
2
When there is much dust and dirt on the air filter, replace it with a new one following the steps below.
Install a new replacement filter and put the air filter back into the
projector.
3
Replacement Filter
Install the replace-
ment filter securely.
Remove the
replacement filter as
shown this figure.
Holder
Maintenance and Cleaning
Cleaning the Projection Lens
Replacing the Air Filter
Maintenance & Cleaning