Filter
Top Products
Section 2. Installation
SATO M-84PRO PN 9001105 Rev. A Page 2-5
LOADING LABELS AND TAGS
1. Open the Top Access Door by swinging it up and to
the left. Open the Side Access Door by swinging it
to the rear of the printer.
2. Open the Print Head Assembly by pushing the Head
Latch toward the rear of the printer. The Print Head
Assembly is spring-loaded and will automatically
open as soon as the Head Latch is disengaged.
3. Loosen the Label Edge Guide and push it to the
outside of the printer to give the maximum label
width.
4. Remove the Label Roll Retainer
Top Access Door
Side Access
Door
Label Roll Retainer
Head Latch
Print Head
Sensor Assembly
Label Hold Down
Label Edge Guide
Label
Guide