Filter
Top Products
Section 2. Installation
Page 2-10 PN 9001105 Rev. A SATO M-84PRO
OPERATOR PANEL
The M-84PRO Operator Panel consists of five LED indicators, two momentary contact switches, three DIP
switches, four adjustment potentiometers and one LCD Display. All of these are accessible from the front
of the printer. They are used to set the printer operating parameters and to indicate the status of the printer
to the operator. After you power on the printer, familiarize yourself with the keys and indicators as it will
help you understand the configuration process.
PRINT Potentiometer to adjust print darkness (fine tuning)
OFFSET Potentiometer to adjust amount of back/forward feed for dispenser/cutter/tear-
off position (+/- 3.75 mm)
PITCH Potentiometer to adjust home position of the label (+/- 3.75 mm). Affects stop
position of label feed, print position and dispense position.
DISPLAY Potentiometer to adjust the contrast of the LCD display.
POWER LED, illuminated when the power is on.
LABEL LED, illuminated when the label supply is not detected.
RIBBON LED, illuminated when the ribbon motion sensor does not detect any ribbon
motion (ribbout out condition).
ERROR LED, illuminated when there is a system fault such as an open print head.