Filter
Top Products
Printing Functions
123
4
❒ You can turn this function on or off
with User Parameters. See p.178
“User Parameters” (switch 10 bit
4).
Page Separation and Length
Reduction
When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, when
8
1
/
2
"×11"L paper is loaded, this fea-
ture splits the received message if the
excess length is about 90mm (3.6 in.)
or more, and reduces it if the excess
length is within about 90mm (3.6 in.).
When a message is split, the split
mark (p) is inserted at the split posi-
tion and about 10mm (0.4 in.) of the
split area is duplicated on the top of
the second sheet.
Note
❒ Your service representative can
customize this feature with the fol-
lowing settings. Bracketed values
are defaults.
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (10mm or
0.4 in.)
• Guideline for split (when mes-
sage is 90mm or 3.6 in. longer
than paper)
❒ You can adjust the overprinting
length and length of reduction
within the following ranges:
• Guideline for split:0 - 155mm (0
- 6.1 in.)
TSI Print
Usually the sender's Fax Header is
printed on received messages. If the
sender has not programmed their Fax
Header, you will not be able to identi-
fy them. However, if you turn this
feature on, the sender's Own Name or
Own Fax Number programmed by
the sender is printed instead so you
can find out where the message came
from.
• TSI = Transmitting Subscriber
Identification
Note
❒ You can turn this function on or
off with User Parameters. See
p.178 “User Parameters”(switch
02 bit 3).
CIL Print
This function requires the optional ISDN
Unit.
If turned on, this information is print-
ed on every page.
The CIL (Call Identification Line) re-
fers to the combination of the receiv-
er's own fax number, name, the
sender's own fax number and name,
time, and page number.
BC
AB
∗
2
2
GFBUNK0N
(Document)
ABC