Filter
Top Products
Maintaining Your Machine
270
9
Important
❒ Make sure that the size of paper
loaded in the unit matches the
size indicated by the size mark.
If not, the size of the loaded pa-
per is not recognized and print-
ed images may be incomplete or
paper jams may occur.
D
DD
D
Adjust the side rail nearest to you
to the size of the paper that you
are loading while squeezing the
green tray extension release tab.
To Change to Legal or Letter Size
A First set the side rail to a size
smaller than Legal (8
1
/
2
×
××
×14 in.)
or Letter (8
1
/
2
×
××
×11 in.) to peel off
the sticker at the bottom as
shown below, then adjust the
side rail to the desired paper
size.
E
EE
E
Make sure that the side rail is set
correctly to the desired paper size
indicated at the bottom of the pa-
per tray.
F
FF
F
Remove the end plate by squeez-
ing in at both sides and lifting it
up.
G
GG
G
Insert the end plate into the slot
for the desired paper size.