Filter
Top Products
Initial Set Up
217
7
Printing the Specified Sender List
You can check the registered Speci-
fied Senders by printing out the list of
the registered Specified Senders.
Reference
See p.241 “Printing the Specified
Sender List” for the printing proce-
dure.
Authorized Reception
You can block out unwanted fax mes-
sages by registering Specified Send-
ers for Authorized Reception and
choosing to receive faxes only from
those senders. If a fax machine other
than those specified as Specified
Senders tries to send you a message,
the line is disconnected immediately
after the connection is established.
This feature is useful, for example, if
you wish to block out junk faxes. You
can also choose to receive faxes from
senders other than those you specify
as the Specified Senders.
Limitation
❒ If you do not register any Specified
Senders, you cannot set up this
function.
Note
❒ It is recommended that you print
the Specified Sender List and keep
it after registering or editing set-
tings for this function. See p.217
“Printing the Specified Sender
List”.
❒ Authorized Reception is not avail-
able for Polling Reception.
❒ You can choose to receive fax mes-
sages from Specified Senders, or
from senders other than Specified
Senders with User Parameters. See
p.178 “User Parameters”(switch 08
bits 3,2).
❒ You can register the Specified
Senders for the following six func-
tions: Multi-copy Reception, Au-
thorized Reception, Specified
Tray, Forwarding, Memory Lock,
TX/RX File Save. The maximum
number of Specified Senders is 50.
❒ You can use up to 20 characters
when registering one item of Spec-
ified Senders for the G3 communi-
cation, and 24 characters for the G4
communication. You can also
specify wildcards. See p.98 “Enter-
ing Characters”, <Basic Features>.
❒ If the Specified Sender's fax ma-
chine is of the same make as your
machine, register the sender's
name registered to their machine.
If the Specified Sender's fax ma-
chine is of a different make, regis-
ter the fax number.
❒ You can check the sender's name
or sender's fax number registered
to the fax machines of Specified
Senders on the Journal. See p.50
“Printing the Journal”.
❒ You can change the current setting
by following the same procedure
for making a new setting. Change
the values of settings according to
your needs.