Filter
Top Products
127
5. Copying
Copying
This section describes how to make
copies.
Important
❒ When making multiple copy sets,
copying starts once all originals
have been scanned into memory. If
memory runs out (free memory
reaches 0%) while scanning in, the
copy job is canceled and the
scanned data is deleted from mem-
ory. However, copying the
scanned original is possible if you
select Stack as the output order for
multiple copying.
Note
❒ Recommended originals are the
same as recommended documents
for fax transmission. Set the origi-
nal and select any scan settings in
the same way as for fax transmis-
sion.
❒ You cannot set the Resolution to
Super Fine in Copy mode. Howev-
er, you can do so by installing the
Optional 40MB Memory Card and
enabling Super Fine resolution in
Copy mode with User Parameters.
See p.178 “User Parameters”
(switch 20 bit 1).
❒ When turning the "EXTRA SUPER
FINE IN TRANSMISSION MODE"
on with User Parameters (switch
20 bit 1), the machine may not be
able to send or receive fax messag-
es using multiple lines, or copy or
print received messages.
❒ In order to use copy paper that you
cannot load in the main paper tray
or optional Paper Tray Unit(s), you
need to install the optional Bypass
Tray Unit. See p.129 “Making Cop-
ies on Special Paper”.
❒ You can set the output order of
multiple sets of copies to Sort
(1,2,3,1,2,3) or Stack (1,1,2,2,3,3)
with User Parameters. See p.178
“User Parameters” (switch 09 bit
7).
❒ If you wish to prevent passersby
from freely making copies, you can
disable the copy feature with User
Parameters. See p.178 “User Pa-
rameters” (switch 12 bit 7).
❒ There may be slight difference in
the size and quality of printed im-
age between fax transmission and
copy feature.
❒ The margins of error when copy-
ing at 100% magnification are as
follows:
• Horizontal: +2.0%, –2.5%
• Vertical: +1.5%, –2.0%
❒ The copying feature is available
only in standby mode. If the ma-
chine is in another operation
mode, make it return to standby
mode. See p.25 “Standby Display”,
<Basic Features>.