Filter
Top Products
Reception Features
124
4
Note
❒ You can turn CIL on and off with
User Parameters. See p.178 “User
Parameters” (switch 02 bit 5).
TID Print
This function requires the optional ISDN
Unit.
If turned on, this information is print-
ed on every page.
The TID (Transmitter ID) refers to the
name registered by the sender in their
fax header.
Note
❒ You can turn TID on and off with
User Parameters. See p.178 “User
Parameters” (switch 02 bit 6).
Reference
p.55 “Own Name/Fax Head-
er/Own Fax Number”, <Basic Fea-
tures>
Adjusting the Printing Density
You can economize on toner by ad-
justing the image density used when
generating all printed output (Output
Density), or just for incoming faxes,
reports and lists (Toner Saving).
Output density
This setting specifies the image densi-
ty used for printing incoming faxes,
reports, lists and copies.
Three levels are available: Dark, Nor-
mal, and Light.
Note
❒ When the machine is shipped, the
default setting is Normal. You can
change this with User Parameters.
See p.178 “User Parameters”
(switch 12 bits 4,3).
Toner saving
Use this feature to save on over 50%
of the toner used for printing incom-
ing faxes, reports and lists.
Limitation
❒ This feature does not apply to cop-
ies, or prints made with the printer
option. However, the optional
Printer Interface has its own toner
saving function.
Note
❒ If this feature is turned on, it inval-
idates the Output Density feature
and image density is fixed at Nor-
mal.
❒ When receiving faxes sent using
Photo (Halftone) mode from this
maker's machines, turn Toner Sav-
ing off.
❒ When Toner Saving is turned on,
printed images will come out light-
er than usual. To check on the im-
age quality, print out the User
Parameter List. See p.189 “Printing
the User Parameter List”.
❒ If the other party sends you a fax
using the Photo (Halftone) mode,
the printed fax image may differ
from the document image.
❒ You can turn Toner Saving on or
off with User Parameters. See
p.178 “User Parameters” (switch
12 bit 2).