Filter
Top Products
Maintaining Your Machine
272
9
C
CC
C
Adjust the size mark to the size of
the paper that you are loading.
Important
❒ Make sure that the size of paper
loaded in the unit matches the
size indicated by the size mark.
If not, the size of the loaded pa-
per is not recognized and print-
ed images may be incomplete or
paper jams may occur.
D
DD
D
Adjust the side rail that is nearer
to you to the size of the paper that
you are loading while squeezing
in the green tray extension release
tab.
To Change to Legal or Letter Size
A First set the side rail to a size
smaller than Legal (8
1
/
2
×
××
×14 in.) or
Letter (8
1
/
2
×
××
×11 in.) to peel off the
sticker at the bottom as shown
below, then adjust the side rail to
the desired paper size.
E
EE
E
Make sure that the side rail is set
correctly to the desired paper size
indicated at the bottom of the
unit.
F
FF
F
Remove the end plate by squeezing
in at both sides and lifting it up.