Filter
Top Products
Transmission Mode
30
1
H
HH
H
When you have specified all the
Transfer Stations, press [No].
Note
❒ If you wish to enter an addition-
al Transfer Station, press [Enter]
and repeat steps D to F.
Transmission Mode menu is
shown and a check mark is added
to Transfer Request.
I
II
I
Press [Exit].
The following display is shown.
Note
❒ "Trans.Req." is shown. If you set
up other transmission mode
functions (except Polling Recep-
tion), "
Others
" is shown.
❒ The numbers of Transfer Sta-
tions are displayed.
J
JJ
J
Press the {
{{
{Start}
}}
} key.
Note
❒ You can cancel transmission of
a message set up for Transfer
Request. See p.35 “Canceling a
Transmission or Reception” .
-
--
-Transfer Request to Other
Manufacturers' Fax Machines
Transfer Request only works with
machines of the same make that have
the Transfer Station function. Howev-
er, you can specify other manufactur-
ers' fax machines as the Transfer
Station if they support a similar func-
tion to this, with the SUB Code Trans-
mission function. Make sure the other
party supports this function before
making a Transfer Request. See p.13
“SUB Code Transmission with the
Mode Key”.