Filter
Top Products
8-17
CHAPTER8
KEY OPERATOR PROGRAMS
Add or Change Extra Preset Ratios
Two extra preset copy ratios can be added within both the reduction
range (25% to 99%) and the enlargement range (101% to 400% ). Only
added preset copy ratios can be changed. The standard preset copy
ratios are fixed in memory and cannot be changed.
When the “ADD OR CHANGE EXTRA PRESET RATIOS.” key is
pressed, the following display will appear.
1. Press a key under “REDUCTION” or “ENLARGEMENT”
on the touch panel.
●
The selected key will be highlighted.
2. Use the and keys to set the desired copy ratio.
●
To decrease or increase the copy ratio rapidly, press and hold
the or key.
●
To add or change other extra preset copy ratios, repeat steps 1
and 2.
●
To cancel an extra preset ratio, select the copy ratio and press
the CLEAR (
C
) key.
3. Press the “OK” key.
Setting a Maximum Number of Copies
Use this program to limit the maximum number of copies per copy run
which can be input in the copy quantity display.
When the “SETTING A MAXIMUM NUMBER OF COPIES.” key is
pressed, the following display will appear.
1. Input the number using the 10-key pad.
●
A number from 1 to 999 can be set.
2. Press the “OK” key.
KEY OPERATOR PROGRAMS
SETTING A MAXIMUM
NUMBER OF COPIES.
INPUT THE NUMBER AND PRESS
[
OK
]
.
MAXIMUM NUMBER OF COPIES
(1~999)
OK
999
KEY OPERATOR PROGRAMS
ADD OR CHANGE EXTRA
PRESET RATIOS.
SELECT THE RATIO TO BE ADDED OR CHANGED AND
SET NEW PRESET RATIO.
REDUCTION
(25~99)
ENLARGEMENT
(101~400)
60
OK
KEY OPERATOR’S GUIDE
Key operator programs