Filter
Top Products
3-44
CHAPTER3
TANDEM COPY
1
Ensure that the two copiers are connected through the
tandem-connection cable and they have been turned
on.
2
On the copier that will be set as the main copier, place
the originals in the document feeder tray or on the
document glass.
3
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
4
Press the “TANDEM COPY” key on the touch panel.
●
The “TANDEM COPY” key will be highlighted.
If this copier is connected with another copier of the same model equipped
with the same options through the tandem-connection cable (AR-CA1),
copying with the two machines can be performed eventually making the
total copy time for multiple copies one-half of the case when using a single
copier.
●
A dedicated tandem-connection cable AR-CA1 is required for tandem
copying.
●
The tandem copying can be used only in the sort mode or staple sort
mode. The group mode cannot be selected.
●
The transparency inserts function cannot be used with this function
because the number of copies must be 1 when the transparency inserts
function is used.
●
The TANDEM COPY key will only be displayed on the touch panel of the
machine set as the main copier, (an authorised Sharp Service Technician
will do the setting of the main and sub copiers at the time of installation).
When the tandem function is selected, (only available on the main
copier) the other will then become the sub copier.
The setting procedure is described below.
●
INTERRUPT will not function during tandem copying.
READY TO CO
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
TANDEM
COPY
ERASE
COVERS
IMAGE EDIT
TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO
A4
SPECIAL FUNCTIONS Tandem copy