Sharp AR-507 Copier User Manual


 
3-26
CHAPTER3
SPECIAL FUNCTIONS Image editing functions
IMAGE EDITING FUNCTIONS
7
Select a type of border line.
Select the solid line, broken line or no border line.
8
Press the upper “OK” key.
9
Make all other desired copier selections and enter the
desired number of copies.
If the required area of the originals is not included on the copies,
select a proper reduction ratio.
10
Press the START ( ) key.
If the document feeder is used, scanning of originals and copying
will start.
If the document glass is used in the SORT mode, proceed to the
next step.
11
Replace the finished original with the next original after
the START (
)key indicator lights up, and then press
the START (
)key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the “CANCEL” key.
4
16
BORDER LINE
CANCEL
OK
OK
1
2 3
4 5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
AUTO IMAGE
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
A3
4
16
BORDER LINE
CANCEL
OK