Filter
Top Products
4-2
CHAPTER4
PAPER
Types and sizes of copy paper
Size Weight Capacity Special paper
(80 g/m
2
(21lb.)
paper)
Paper trays A5 to A3 56 to 105 g/m
2
500 sheets
1 and 2 (5-1/2" x 8-1/2" (15 lbs. to 28 lbs.)
to 11" x 17")
Bypass tray Face up A6 to A3 52 to 128 g/m
2
50 sheets Transparency film,
delivery (5-1/2" x 8-1/2" (14 lbs. to 34 lbs.)* labels, tracing paper,
to 11" x 17") (Ordinary paper) 176 g/m
2
(65 lb.)
paper**, 200 g/m
2
(110 lb.) paper**
Face down A5 to A3 56 to 105 g/m
2
50 sheets
delivery (8-1/2" x 11" (15 lbs. to 28 lbs.)
to 11" x 17")
●
For best results, use only paper recommended by SHARP.
* For paper weighing from 105 to 128 g/m
2
(28 to 34 lbs.), A4 (8-1/2" x 11")
is the maximum size that can be fed through the bypass tray.
** Paper heavier than 128 g/m
2
(34 lbs.) must be fed narrow side into the
feed slot of the bypass tray.
★★
★★
★
KEY OPERATOR To enable face down delivery from the bypass tray,
paper type setting in the bypass tray must be enabled. See page 8-22.
Loading copy paper
“OPEN TRAY AND ADD PAPER.” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
“PUSH PAPER TRAY INTO THE MACHINE UNTIL IT
LATCHES.” will be displayed. Install it or push it back firmly into
place.
For best results, use only Sharp recommended paper.
SUPPLIES Paper