Filter
Top Products
Loading the Imaging Film
14
Loading the Imaging Film
Your fax uses a roll of imaging film to create printed text and images. The print head
in the fax applies heat to the imaging film to transfer ink to the paper. Follow the
steps below to load or replace the film.
1
Press the release marked OPEN
and open the print compartment
cover.
When replacing the film, use a
roll of Sharp UX-15CR imaging
film. One roll can print about 500
A4-size pages.
The initial starter roll of
imaging film included with
your fax can print about 60
A4-size pages.
Caution!
The printing head (the strip of metal
on the underside of the cover)
applies heat to the printing film. It
may be hot if a document has just
been printed.
2
If you are replacing the imaging
film, take the old film out of the
printing compartment and remove
the three (3) green gears and the
green flange from the ends of the
spools.
DO NOT DISCARD THE GREEN
GEARS AND THE GREEN
FLANGE!
all-fo1530a.book Page 14 Tuesday, December 5, 2000 2:07 PM