Filter
Top Products
Entering and Using Programs
80
Entering and Using Programs
If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.
♦
Rapid Keys 16/P1 and 17/P2 can be used as Program Keys. However, a key
cannot be used if it is already being used for Rapid Key Dialling.
♦
Only Speed Dial numbers can be used to enter fax numbers of receiving
machines in the Program Keys. Full numbers cannot be entered.
♦
If the program is for a regular transmission or polling operation, a timer setting can
be included to have the operation performed automatically at a selected time.
♦
To clear a mistake, press the STOP key.
2
Press 1 to select SET.
PRG.ENTRY MODE
or
16/P1
35
17/P2
36
3
Select a Program Key ("16/P1" or
"17/P2") to select it.
4
Enter a name for the program by
pressing the letter entry keys. (If
you don’t want to enter a name, go
directly to Step 5.)
Example: SHARP
7
4
7
7
7 7
4 4 2 2
7
7
7
7
SPEAKER
7 7
1
7
FUNCTION
5
Press the START key.
START
Initial procedure
To program a Program Key, first
perform the following procedure. After
you have completed this procedure,
go to the procedure for the specific
operation you want to program (see
the following pages).
1
Press these keys:
all-fo1530a.book Page 80 Tuesday, December 5, 2000 2:07 PM