Filter
Top Products
Entering and Using Programs
81
7. Special
Functions
6
Press the * key or the # key until
the desired operation appears in
the display.
Transmission (SEND MODE)
Polling
Broadcasting
Transmission
(Continued from Initial procedure.)
8
Press "1" if you want the document
to be scanned into memory and
then transmitted, or "2" if you want
the document to be transmitted
directly from the feeder. (Note: If
you select "2", you can include a
timer setting in the program.)
•
If you pressed "1", go to Step 12. If
you pressed "2" and don’t want to
make a timer setting, go to Step11.
1 2
or
7
Press the START key and go to the
specific procedure for your
operation (see the following
pages).
9
Enter the time at which you want
the operation to take place (2 digits
for the hour and 2 digits for the
minute).
Example: 9:25
2
5
0
9
10
If you want the document to be sent
through memory, press the START
key.
START
11
Enter the Speed Dial number of the
receiving fax machine.
12
Press the START key.
START
2
5
(Example)
13
If desired, set the resolution and/or
contrast by pressing the
RESOLUTION key (otherwise, skip
this step).
RESOLUTION
START
or
14
Press the START key and then the
STOP key.
STOP
START
all-fo1530a.book Page 81 Tuesday, December 5, 2000 2:07 PM