Filter
Top Products
Sending a Fax by Automatic Dialling
40
Automatic redialling
If you use automatic dialling
(including Direct Keypad Dialling) and
the line is busy, the fax machine will
automatically redial the number. The
fax machine will make up to two
redialling attempts at an interval of
five minutes.
♦
To stop automatic redialling, press
the STOP key.
5
Press the START key. The
document will be automatically
transmitted once the connection is
established.
START
Error Correction Mode
The fax machine is set to
automatically correct any distortions
in a transmission due to noise on the
telephone line before printing at the
receiving end. This function is called
Error Correction Mode (ECM). ECM
is effective for both transmissions and
receptions, and is only effective when
the other fax machine has ECM as
well.
If desired, you can turn ECM off. This
will increase slightly the amount of
memory available for memory
transmission and reception.
ECM MODE
1
Press these keys:
FUNCTION
4
2
Press 1 to turn on ECM or 2 to turn
it off.
3
Press the STOP key to return to
the date and time display.
STOP
or
YES NO
1 2
all-fo1530a.book Page 40 Tuesday, December 5, 2000 2:07 PM