Filter
Top Products
Loading the Imaging Film
16
8
Wind the film slightly (rotate the
gear on the right side of the empty
spool) so that there is no slack in
the film. Make sure that both edges
of the film wind onto the spool
evenly.
7
Insert the empty spool into the back
of the compartment so that the gear
and the flange fit into the slots on
the sides of the compartment.
•
Make sure that the gear engages
with the gear below it.
9
Close the print compartment cover,
making sure it clicks into place.
Caution!
Close the cover slowly to make
sure it doesn't pinch your fingers.
10
Load paper in the paper tray and
then press the following keys to
initialize the film.
Note: Paper must be loaded before
the film can be initialized. To load
paper, see Loading the Printing
Paper.
FUNCTION
6
INITIALIZE FILM
START
all-fo1530a.book Page 16 Tuesday, December 5, 2000 2:07 PM