Filter
Top Products
Polling (Requesting a Fax Transmission)
76
Being polled (polling
standby)
To let another fax machine poll your
fax, press the RECEPTION MODE
key to set the reception mode to FAX
and load the document(s).
Transmission will take place when the
other fax machine calls your machine
and activates polling. Automatic
reception is possible while your fax is
on polling standby.
1
Press these keys:
SECURITY SELECT
FUNCTION
3
Press
3 times
2
Press 1 to turn polling security on,
or 2 to turn it off.
START
STOP
3
Press the START key and then the
STOP key.
Polling security
Polling Security allows you to prevent
unauthorized polling of your machine.
When this function is turned on,
polling will only take place when the
fax number of the polling fax machine
has been entered in your machine's
list of permitted fax numbers (called
"passcode numbers"). The number of
the polling fax must also be correctly
programmed into itself for
identification.
To use Polling Security, follow the
steps below to turn the function on,
and then enter permitted numbers as
shown on the following page.
2
Press Rapid Key 15/POLL.
•
If you used the handset, replace it
when POLLING appears in the
display. Reception will begin.
15/POLL
34
or
YES NO
1 2
all-fo1530a.book Page 76 Tuesday, December 5, 2000 2:07 PM