Filter
Top Products
41
3. Receiving
Documents
3. Receiving Documents
Using TEL/FAX Mode
When the reception mode is set to TEL/FAX, your fax automatically answers all calls
on 2 rings. After answering, your fax monitors the line for about 5 seconds to see if a
fax tone is being sent.
Press the RECEPTION
MODE key until the
arrow in the display
points to TEL/FAX.
♦
If your fax detects a fax tone (this means that the call is an automatically dialled
fax), it will automatically begin reception of the incoming document.
♦
If your fax doesn't detect a fax tone (this means that the call is a voice call or
manually dialled fax), it will make a ringing sound (called pseudo ringing) for 15
seconds to alert you to answer. If you don't answer within this time, your fax will
send a fax tone to the other machine to allow the calling party to send a fax
manually if they desire.
Comments:
Only the fax will alert you to voice calls or manually dialled faxes by pseudo ringing.
An extension phone connected to the same line will not ring after the connection has
been made.
RECEPTION
MODE
FAX
TEL
A.M.
TEL/FAX
all-fo1530a.book Page 41 Tuesday, December 5, 2000 2:07 PM