Filter
Top Products
Distinctive Ringing (Requires Subscription to Service)
64
1
Press these keys:
Distinctive Ringing
(Requires Subscription to Service)
If you subscribe to a distinctive ring service from your telephone company, you will
need to turn on the distinctive ring function. When this is done, your fax machine will
signal voice calls by the normal ring pattern, and fax transmissions by a special ring
pattern. In the case of a fax transmission, your fax machine will automatically
answer the call and receive the fax.
The distinctive ring function is used with the reception mode set to FAX. When your
fax number is dialled, your fax machine will signal the call with a special ringing
sound, then answer automatically and begin reception after the number of rings set
with Option Setting 2 (the factory setting is 2 rings). When your voice number is
dialled, the fax machine will signal the call with the normal ringing sound to let you
know that you must answer personally.
The factory setting is "NO". If set to "YES", both Australian (Fax Duet) and New
Zealand (Fax Ability) Distinctive Ring are supported.
Important:
♦
The distinctive ring function can only be used if you subscribe to a distinctive ring
service from your telephone company. Do not turn on distinctive ring if you are on
a normal line, as the fax machine will not operate properly.
♦
If you turn on distinctive ring, the fax will not operate in TEL/FAX reception mode.
FUNCTION
4
Press
8 times
DUPLEX RINGING
2
Press “1”(YES) to turn Duplex
Ringing on, or “2”(NO) to turn it off.
The display will briefly show your
selection, and then:
FAX SIFNAL RX
3
Press the STOP key to return to
the date and time display.
STOP
or
YES NO
1 2
4
Set the reception mode to FAX.
FAX
TEL
TEL/FAX
A.M.
RECEPTION
MODE
all-fo1530a.book Page 64 Tuesday, December 5, 2000 2:07 PM