Filter
Top Products
Sending a Fax by Automatic Dialling
39
2. Sending
Documents
Searching for an auto-dial
number
If you don’t remember the Rapid Key
or Speed Dial number in which you
have programmed a particular fax
number, you can search for the
number by following the steps below.
Once you have found the number,
you can dial and transmit the loaded
document by simply pressing the
START key.
3
Enter the first letter of the stored
name by pressing the appropriate
number key (the key below the
marked letter) one or more times
until the letter appears in the
display. If the name begins with a
special character or number, press
1.
•
Set the resolution and/or contrast if
desired.
2
Press the HOLD/SEARCH key and
then the 1 key.
HOLD/
SEARCH
1
1
Load the document(s).
RESOLUTION
2
5
8
GHI
JKL
MNO
TUV
WXYZ
PQRS
ABC
DEF
1
4
7
3
6
9
•
If you don’t remember the first
letter, go to Step 4 (you will scroll
through the list from the beginning).
•
If a name wasn’t stored for the
number, press 0. This will cause
numbers, not names, to appear
when you scroll.
READY TO SEND
4
Press the # key or the * key to
scroll through the names (numbers
if you pressed 0). Stop when the
desired name appears in the
display.
•
If no names have been stored that
begin with the entered letter, you
will scroll from the next name, in
alphabetical order, in the list. If no
names/numbers have been stored
at all, NO DATA will appear.
or
all-fo1530a.book Page 39 Tuesday, December 5, 2000 2:07 PM