Filter
Top Products
Timer Operations
78
Timer Operations
The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at any one time, and the times they will be performed
can be specified up to 24 hours in advance.
♦
You can use this function to take advantage of lower off-peak telephone rates
without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
2
Press # to set a transmission
operation (SEND MODE), or * to
set a polling operation (POLLING
MODE).
3
Press 1 to select SET.
TIMER MODE
4
Enter the time at which you want
the operation to take place (2 digits
for the hour and 2 digits for the
minute).
Example: 9:25
or
SEND
POLLING
1
2
5
0
9
Setting a timer operation
1
Press these keys:
5
Press the START key.
START
(Example)
6
Enter the Speed Dial number of the
receiving fax machine.
•
If this is a polling operation, go to
Step 10.
0
5
1
FUNCTION
7
Press the START key.
START
8
Adjust the resolution and/or
contrast if desired (skip to the next
step if you don't want to change
settings).
RESOLUTION
all-fo1530a.book Page 78 Tuesday, December 5, 2000 2:07 PM