Filter
Top Products
101
8
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key ( ) to scan the back of the
card.
Use the same [START] key that you used for the front side of
the card.
To cancel scanning...
Press the [STOP] key ( ).
9
Touch the [Read-End] key.
Copying will begin.
To cancel copying...
Press the [STOP] key ( ).
• The original must be placed on the document glass.
• Copying is only possible on standard size paper.
• XY Zoom cannot be used when using this function.
• The image cannot be rotated when using this function.
To cancel card shot...
Touch the [Cancel] key in the screen of step 6.
System Settings (Administrator): Card Shot Settings
This is used to set the values to which the size returns when the [Size Reset] key is pressed. 25 mm to 210 mm (1" to 8-1/2")
can be entered for both the horizontal and vertical dimensions.
The factory default settings are 86 mm (3-3/8") for X (the width) and 54 mm (2-1/8") for Y (the height).
or
Place next original. Press [Start].
When finished, press [Read-End].
Read-End