Filter
Top Products
Introduction
-11
16
Remote control
sensor
13
18
Kensington Security
Standard connector
INPUT 2 terminals
Terminals for
component and RGB
signals
.
19
INPUT 5 terminal
Terminal for DVI
digital, computer
RGB, and
COMPONENT
signals.
18
INPUT 1 terminals
Terminals for
component and
RGB signals
.
17
INPUT 3 terminal
Terminal for
connecting video
equipment with an
S-video terminal.
24
WIRED REMOTE
control input
terminal
17
INPUT 4 terminal
For connecting
video equipment.
73
Intake vent
DC 12V OUTPUT
terminal
23
RS-232C terminal
For controlling
projector using a
computer.
AC socket
73
Exhaust vent
73
Intake vent
Projector (Rear View)
Using the Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Using the Terminal Cover
When the projector is used on a desktop, high
mounted or ceiling mounted, attach the terminal
cover (supplied) to hide the connecting cables.
Attaching the Terminal Cover
1 Align with the tab on the projector, push the
two clips attached on the bottom.
2 Press the tab to attach to the projector.
1
1
1
2
2
2
PUSH!
Attach the clips after removing the rubber cap.
XV-Z10000#Print#p06_14.p65 02.10.25, 7:25 PM11