Sharp XV-Z10000 Projector User Manual


 
Connections and Setup
-25
Setup
Foot releases
Adjustment feet
Using the Adjustment
Feet
The height of the projector can be adjusted
using the adjustment feet when the surface
the projector is placed on is uneven or when
the screen is slanted.
The projection of the image can be made
higher by adjusting the projector when it is in
a location lower than the screen.
1 Press the foot releases and lift
the projector to the desired
angle.
2 Remove your hands from the
foot releases. Once the adjust-
ment feet have locked in posi-
tion, release the projector.
If the screen is at an angle, the ad-
justment feet can be used to adjust the
angle of the image.
Note
The projector is adjustable up to approxi-
mately 5 degrees from the standard posi-
tion.
When the height of the projector is ad-
justed, the image may become distorted
(keystoned), depending on the relative
positions of the projector and the screen.
See page 36 for details on the keystone
correction.
Info
Do not hold the lens when lifting or lower-
ing the projector.
When lowering the projector, be careful
not to get your finger caught in the area
between the adjustment foot and the
projector.
XV-Z10000#Print#p25_30.p65 02.10.25, 7:28 PM25