Filter
Top Products
48
Function parameters for
r
,
R
,
X
,
Y
,
c
,
b
and
A
(when using as TL key)
*1:Item: Selection: Entry:
A Footer printing* Allow 1
Disallow* 0
B Amount tendered entry* Compulsory 1
Non-compulsory (for
X
,
Y
and
A
)* 0
Inhibit (for
c
and
b
)* 0
C Entry digit limit For
X
,
Y
,
c
,
b
and
A
0-8 (default:8)
For
r
and
R
0-9 (default:9)
*When programming for
r
or
R
, always enter 0 for A and B.
Footer printing (only for
X
,
Y
,
c
,
b
and
A
)
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to “Logo
messages” section on page 22.
Amount tendered entry (only for
X
,
Y
,
c
,
b
and
A
)
• You may select amount tendered, compulsory or optional, for the
A
,
X
and
Y
keys.
• You may select amount tendered, compulsory or inhibited, for the
c
and
b
keys.
Entry digit limit
• For the
X
,
Y
,
c
,
b
,
r
and
R
keys program upper limit entry amount for the tendered amount. For
the
A
key, program upper limit entry for total cash amount which can be handled on the register. The
entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit
limit is represented by the number of allowable digits for the maximum entry or total amount. When “0” is set,
the operation of the corresponding key is prohibited.
From left, ABC
018
@
XA
PrintKey operation example
*
1
ABC or
A
To program “0” for all items
To program for another key
*
2
:Press s key for TL key setting.
@s, X, Y, c, b, rR
*
2
A113_3 FOR THE MANAGER 06.9.11 6:39 PM Page 48