Filter
Top Products
16
For An Existing Windows 7 (64-bit) Installation
1. Setup your RAID array, and boot up Windows.
2. At the desktop, insert the driver CD. Close the
AutoPlay box if prompted.
3. Right click Computer, click Manage, click Device
Manager.
4. Under Other devices, right click RAID Controller,
click Update Driver Software.
5. Click Browse my computer for driver software.
6. Type D:\64bit, click Next. (Change D: to match
your CD/DVD-ROM drive letter)
7. At Windows has successfully updated your driver
software, click Close to complete the installation.
Go to SATARaid5 GUI on page 24 and install the RAID
monitoring utility.
To Verify Windows 7 Installation
1. Right click Computer, click Manage, click Device
Manager.
2. Double click Storage controllers, and Silicon Image
SiI 3114 SoftRaid5 Controller should be displayed.
Windows Vista (32-/64-bit)
For A New Windows Vista Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Windows installation procedure.
3. At Where do you want to install Windows?, click
Load Drivers.
4. Insert the driver CD, click Browse.