Filter
Top Products
32
Sorting: This command displays a dialog box to the the
user choose up to 3 items to sort event items in the event
log.
Fields: This command displays a dialog box to let the
user choose which fields will be shown in the event log.
Resources
This command displays the Resources Information
window. This feature is for debugging purpose only.
Legacy Support Menu Command
Create Legacy RAID Group
This command displays a dialog box to let the user create
legacy (bootable) RAID groups. This item is disabled if
new RAID groups exist. The parameters are discussed
below.
RAID Group: Selects a group ID from the available list.
Configuration: Striped: for RAID 0; Mirrored: for RAID 1;
Contiguous: for single drive; Concatenated: for JBOD
(requires at least 2 hard drives).
Capacity: Select from a list of RAID group sizes.
Chunk Size: Select one value from the available list.
Rebuild Priority: Select from the available list. RAID 0
and virtual disk do not require this. 10 is the highest level
of rebuild priority which means that rebuild times will be
faster but will take more CPU resources to rebuild.
Devices: Select RAID member devices from the available
device segment list.
Rebuild Legacy RAID Group
This command displays a dialog box to let the user
choose a replacement segment to rebuild a non-fault
tolerant legacy RAID group.