Filter
Top Products
20
To Verify XP / Server 2003 / 2000 Installation
1. Right click My Computer, click Manage, click
Device Manager.
2. Double click SCSI and RAID controllers, and Silicon
Image SiI 3114 SoftRaid 5 Controller should be
displayed.
Windows Server 2008
(32-bit)
For A New Server 2008 (32-bit) Installation
These instructions follow bootable Windows Installation
CD/DVD-ROM procedure. Your steps may differ when
using a different media for Windows installation.
1. Setup the RAID array prior to Windows installation.
2. Follow Windows Server 2008 installation procedure.
3. At Where do you want to install Windows?, click
Load Drivers.
4. Insert the driver CD, click Browse.
5. Double click CD Drive ... Drivers.
6. Select 32bit, then click OK.
7. Select Silicon Image SiI..., then click Next.
8. Follow the on-screen instructions to complete Server
2008 installation.
When Windows installation completes, go to SATARaid5
GUI on page 24 and install the RAID monitoring utility.
For An Existing Server 2008 (32-bit) Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window, click Locate
and install the driver automatically (recommended).
3. Insert the driver CD, click Continue.