Filter
Top Products
18
2. Follow Microsoft installation procedure to install
Windows accordingly.
3. At the Windows Setup screen, press F6 to install the
driver.
Note: Prior to this step, you may be prompted to
restart in order to continue with the installation.
4. Insert the driver diskette that you made earlier.
Press S then press Enter.
5. Select Silicon Image SiI 3114 SoftRaid 5 Controller
for Windows XP/Server 2003, press Enter.
6. Press Enter to continue and follow on-screen
instructions to complete the installation.
When Windows installation completes, go to SATARaid5
GUI on page 24 and install the RAID monitoring utility.
For Existing XP (32-bit) / Server 2003 (32-bit) Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard.
XP (w/SP1 or earlier)/Server 2003: continue to step #3.
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later): select
No, not this time, then click Next.
3. Insert driver CD, select Install the software
automatically (Recommended), then click Next.
4. Click Next, then click Finish.
5. Remove the driver CD, shutdown Windows, and
setup your RAID array.
When Windows resumes, go to SATARaid5 GUI on
page 24 and install the RAID monitoring utility.