Filter
Top Products
23
4. When prompted press S to specify the location of
the driver.
5. Insert the driver diskette you made earlier, then
press Enter.
6. Select Silicon Image Sil 3114 SoftRaid 5 Controller
for Windows 2000, then press Enter.
7. Press Enter to finish driver installation, then follow
the on-screen instructions to complete the Windows
installation.
When Windows installation completes, go to SATARaid5
GUI on page 24 and install the RAID monitoring utility.
For An Existing Windows 2000 Installation
1. Setup the RAID array and boot up to Windows.
2. At the Found New Hardware Wizard, click Next.
3. Select Search for a suitable driver for my device
(recommended), then click Next.
4. Insert the driver CD, check CD-ROM drives, uncheck
the other check boxes, then click Next.
5. Click Next, then Finish.
6. Repeat steps 3-5.
7. Remove the driver CD, then restart Windows to
complete the installation.
When Windows resumes, go to SATARaid5 GUI on
page 24 and install the RAID monitoring utility.