Filter
Top Products
17
5. Double click your CD-ROM drive.
For 32-bit Windows Vista: Click OK.
For 64-bit Windows Vista: Select 64bit, then click OK.
6. Select Silicon Image SiI ..., then click Next.
7. Follow the on-screen instructions to complete
Windows Vista operating system installation.
When Windows installation completes, go to SATARaid5
GUI on page 24 and install the RAID monitoring utility.
For An Existing Windows Vista Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window, click Locate
and install the driver automatically (recommended).
3. Insert the driver CD, click Continue.
4. Click Next, then click Close.
5. Shutdown Windows, and setup your RAID array.
When Windows resumes, go to SATARaid5 GUI on
page 24 and install the RAID monitoring utility.
To Verify Windows Vista Installation
1. Right click Computer, click Manage, click Continue,
select Device Manager.
2. Double click Storage controllers, and Silicon Image
SiI 3114 SoftRaid5 Controller should be displayed.
Windows XP (32-bit) / Server 2003 (32-bit)
For A New XP (32-bit) / Server 2003 (32-bit) Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents
of the 32bit folder, found on the driver CD, onto a blank
floppy disk then follow the directions below.
1. Setup the RAID array prior to Windows installation.