Filter
Top Products
21
4. Click Next, then click Close.
5. Shutdown Windows, and setup your RAID array.
When Windows resumes, go to SATARaid5 GUI on
page 24 and install the RAID monitoring utility.
Windows Server 2008
(64-bit)
For A New Server 2008 (64-bit) Installation
These instructions follow bootable Windows Installation
CD/DVD-ROM procedure. Your steps may differ when
using a different media for Windows installation.
1. Setup the RAID array prior to Windows installation.
2. Follow Windows installation procedure.
3. At Where do you want to install Windows?, click
Load Drivers.
4. Insert the driver CD, click Browse.
5. Double click CD Drive ... Drivers.
6. Select 64bit, then click OK.
7. Select Silicon Image SiI..., then click Next.
8. Follow on-screen instructions to complete Windows
Server 2008 installation.
When Windows installation completes, go to SATARaid5
GUI on page 24 and install the RAID monitoring utility.
For An Existing Server 2008 (64-bit) Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window, click Locate
and install the driver automatically (recommended).
3. Insert the driver CD, click Continue.
4. Click Next, then click Close.