Filter
Top Products
Adding ATM VCs
105
Adding ATM VCs
You may need to create a VC if none has been predefined
on your system or if you use multiple services with your ISP.
Each service may require its own VC. Follow these instructions
to add a VC:
1. From the [ATM VC Configuration] page, click [Add].
The [ATM VC - Add] page appears, as shown in Figure 34.
Figure 34. ATM VC - Add Page
2. Select an interface name from the [VC Interface:]
drop-down list.
3. Enter the [VPI:] and [VCI:] values assigned by your ISP,
and select the [Mux Type:] from the drop-down list.
4. In the [Max Proto per AAL5:] text box, enter the number
of protocols that the ISP indicated that you will need
to configure (usually only one).
5. Click [Submit].