Filter
Top Products
Quick Start
26
4.
Click the [Admin] tab that appears in the upper right corner of
the page,
and then click [Commit & Reboot] in the task bar.
5. Click [Commit]. A page will appear briefly to confirm your
changes, and then you will be returned to the [Commit &
Reboot] page.
You can click [Delete] to remove all existing [Quick Configuration]
settings and return to the default values.
You have now finished customizing the basic settings. Read the
following
section in order to determine whether you need to
change additional settings.
Default Router Settings
In addition to handling the DSL connection to your ISP, the ADSL
Barricade can provide a variety of services to your network. The
device is preconfigured with default settings for use with a typical
home or small office network.
The table of Figure 5 lists some of the most important default
settings; these
and other features are fully described in the
subsequent sections. If you are familiar with network configuration,
review the settings
in Figure 5 and check whether they meet the
needs of your network. Follow
the instructions and change them if
necessary. If you are unfamiliar with these settings, try to use the
device without modification, or contact your ISP for assistance.
Before modifying any settings, review the Getting Started section
with the Configuration Manager. We strongly recommend that
you contact your ISP prior to changing the default configuration.