Filter
Top Products
7
Q
UICK
S
TART
This Quick Start provides basic instructions for connecting
the ADSL Barricade to a computer or LAN and to the Internet.
•
Connecting the Hardware describes how to set up the
hardware.
•
Installing USB Driver describes how to install the USB driver
for the ADSL Barricade.
•
Configuring Your Computers describes how to configure
Internet properties on your computer(s).
•
Configuring the ADSL Barricade shows you how to configure
basic settings on the ADSL Barricade to get your LAN
connected to the Internet.
After having set up and configured the device, please follow the
instructions on page 27 to check whether it is working properly.
This Quick Start assumes that you have already established
an ADSL service with your Internet service provider (ISP).
These instructions provide a basic configuration that should
be compatible with your home or small office network setup.
Refer to the subsequent chapters for additional configuration
instructions.
Connecting the Hardware
You connect the device to the wall phone jack, the power outlet,
and your computer or network.
Warning: Before you begin, turn the power off for all devices.
These include your computer(s), your LAN hub/
switch (if applicable), and the ADSL Barricade.