Filter
Top Products
Configuring the ATM Virtual Circuit
104
The ATM VC Configuration table displays the following fields
(contact your ISP to determine these settings):
Field Description
Interface This field indicates the name of the lower-level interface on which
this VC operates. The low-level interface names are preconfigured
in the software and identify the type of traffic that can be
supported, such as data or voice. Internet data services typically
use an aal5-type interface.
Vpi
Vci
Mux Type
These settings identify a unique ATM data path for communication
between your ADSL Barricade and your ISP.
Max Proto
per AAL5
If you are using an AAL5-type of interface, this setting indicates
the number of higher-level interfaces that the VC can support
(the higher level interfaces can be PPP, EoA, or IPoA interfaces).
Contact your ISP to determine which connection protocol(s) they
require.
Action (s)
This field displays the icons you can click on to modify ( — see
page 106) and delete ( ) the associated interface. You cannot
delete an ATM interface if another protocol such as PPP, EoA, or
IPoA has been defined to operate over the ATM interface. Delete
the higher-level interface first, and then delete the ATM interface.