Filter
Top Products
Installing USB Driver
9
Note:
ADSL splitters/microfilters are included with some
models.
Step 2. Connect the Ethernet cable
If you are connecting a LAN to the ADSL Barricade, attach one
end of a provided Ethernet cable to a regular hub port and the
other to the Ethernet port on the ADSL Barricade. If you are
using the ADSL Barricade with a single computer and no hub,
you must use an Ethernet cable to attach the PC directly to the
device. The cable is wired differently than the cable you would
use to connect to a hub.
Step 3. Attach the power connector
Connect the AC power adapter to the Power connector on
the back of the device and plug in the adapter to a wall outlet
or power strip.
Step 4. Power up your systems
Turn on and boot up your computer(s) and any LAN device
such as hubs or switches.
Installing USB Driver
This section details how to install the USB driver for the SMC
ADSL Barricade. If you choose to use the USB port please follow
these instructions.
Note:
Do not connect the USB cable until prompted by the
Setup Wizard.