Filter
Top Products
Quick Start
8
Figure 1. Overview of Hardware Connections
Step 1. Connect the ADSL cable
Connect one end of the provided phone cable (RJ-11) to the port
labeled DSL on the Rear Panel of the device. Connect the other
end to your wall phone jack.
You can attach a telephone line to the device. This is helpful
when the ADSL line uses the only convenient wall phone jack.
If desired, connect the telephone cable to the port labeled Phone.
Warning:
Although you use the same type of cable, the ADSL
and Phone ports are not interchangeable. Do not
route the ADSL connection through the Phone port.
ADSL Barricade
Wall Jack
Hub/switch (for local
area network)
or
To a hub: use cross-
over cable to uplink
port or straight cable
to standard port
To a PC: use a
cross-over cable
AC adapter
Stand-alone computer
Stand-alone computer
Networked Computers
(See section on installing USB
driver before connecting cable)