Filter
Top Products
Configuring Network Address Translation
72
6. In the [Local Address From:] field and [Local Address To:]
fields, type the starting and ending IP addresses, respectively,
of the range of private addresses you use on your network
that you want to have translated.
You can specify that data from all LAN addresses should
be translated by typing [0] (zero) in each [From] field and [255]
in each [To] field. Or, type the same address in both fields if
the rule only applies to one LAN computer.
7. In the [Global Address] field, type the public IP address
assigned to you by your ISP.
8. Click [Submit].
9. When a page appears to confirm your change, click [Close]
to return to the [NAT Configuration] page. The new rule should
display in the [NAT Rule Configuration] table.
10. Ensure that the [Enable] radio button is selected, and then
click [Submit]. A page appears to confirm your changes.
11. Click the [Admin] tab, and then click [Commit and Reboot]
in the task bar.
12. Click [Commit] to save your changes to the permanent
memory.