Sony DVS-V6464B/V6464M Network Router User Manual


 
5-33
ROUTING SWITCHER SYSTEM (E)
5-2. Setting Items of the Secondary Station
SONY ROUTING SYSTEM SETUP MENU BKS-R3202 V3.10 STATION NUMBER 7
SELECT DESTINATION NAME
001=OUT001 002=OUT002 003=OUT003 004=OUT004
005=OUT005 006=OUT006 007=OUT007 008=OUT008
009=OUT009 010=OUT010 011=OUT011 012=OUT012
013=OUT013 014=OUT014 015=OUT015 016=OUT016
017=OUT017 018=OUT018 019=OUT019 020=OUT020
021=OUT021 022=OUT022 023=OUT023 024=OUT024
025=OUT025 026=OUT026 027=OUT027 028=OUT028
029=OUT029 030=OUT030 031=OUT031 032=OUT032
033=OUT033 034=OUT034 035=OUT035 036=OUT036
037=OUT037 038=OUT038 039=OUT039 040=OUT040
041=OUT041 042=OUT042 043=OUT043 044=OUT044
045=OUT045 046=OUT046 047=OUT047 048=
049= 050=OUT050 051=OUT051 052=OUT052
053=OUT053 054=OUT054 055=OUT055 056=OUT056
057= 058= 059= 060= 
061=OUT061 062=OUT062 063=OUT063 064=OUT064
Ctrl-E:MENU Ctrl-D:RETURN
O: SET AVAILABLE DESTINATION
(BKS-R3202/R3206)
Purpose
This menu is used to set the destination which can be
selected by the remote control unit.
Setting Procedure
1. Call the menu screen of the remote control unit to be
set using menu item [R], and then select menu item
[O].
2. Select the destination using the cursor.
Press [(] and [)] when the cursor is placed at the top
or bottom, and the next destination number will
appear. The destination numbers are 001 to 512.
3. When press [Enter], the status of the destination
indicated by cursor will be changed.
m
. The destination name indicated on this screen can be
selected from the remote control unit.
. The destination indicated as “ · · · · ” is not registered
on the destination table.
. The blank destination can not be selected from the
remote control unit.
4. Press [Ctrl] _ [E] to display the menu screen of the
secondary station.
Press [Ctrl] _ [D] to display the menu screen of the
primary station.
Example of Setting Screen
O: SET AVAILABLE DESTINATION
(BKS-R1607/R3210/R3216/R1617/R1618/R3219/
R3220/R1621)
Purpose
This menu sets the range of selectable destinations and the
range of selectable sources corresponding to the range of
selectable destinations.
Setting procedure
1. Invoke the menu display of the remote control unit to set
the menu item [R]. Then select the menu item [O].
2. Select a destination to be set using the cursor key.
When the key [(], [)] is pressed while the cursor key
is located either top end or bottom end of display, the
display moves to that of the next terminal number.
The output terminal numbers are from 001 to 512.
3. Pressing [Enter] toggles between selection and non-
selection of destination shown by cursor.
m
. The destinations whose names are displayed, can be
selected from this remote control.
. The indication “ · · · · ” means that the name is not
registered yet on the destination table.
. The blank destination cannot be selected from the
panel.
Example of Setting Screen (Selectable Destination)
4. Press [Ctrl] _ [F] to switch to the display allowing
setting of the selectable sources.
Pressing [Ctrl] _ [E] switches to the menu screen of
the secondary station.
Pressing [Ctrl] _ [D] returns to the menu screen of the
primary station.
SONY ROUTING SYSTEM SETUP MENU BKS-R3216 V1.00 STATION NUMBER 4
SELECT DESTINATION NAME
0001=OUT001 0002=OUT002 0003=OUT003 0004=OUT004
0005=OUT005 0006=OUT006 0007=OUT007 0008=OUT008
0009=OUT009 0010=OUT010 0011=OUT011 0012=OUT012
0013=OUT013 0014=OUT014 0015=OUT015 0016=OUT016
0017=OUT017 0018=OUT018 0019=OUT019 0020=OUT020
0021=OUT021 0022=OUT022 0023=OUT023 0024=OUT024
0025=OUT025 0026=OUT026 0027=OUT027 0028=OUT028
0029=OUT029 0030=OUT030 0031=OUT031 0032=OUT032
0033=OUT033 0034=OUT034 0035=OUT035 0036=OUT036
0037=OUT037 0038=OUT038 0039=OUT039 0040=OUT040
0041=OUT041 0042=OUT042 0043=OUT043 0044=OUT044
0045=OUT045 0046=OUT046 0047=OUT047 0048=OUT048
0049=OUT049 0050=OUT050 0051=OUT051 0052=OUT052
0053=OUT053 0054=OUT054 0055=OUT055 0056=OUT056
0057=OUT057 0058=OUT058 0059=OUT059 0060=OUT060
0061=OUT061 0062=OUT062 0063=OUT063 0064=OUT064
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-F:SELECT SOURCE