Sony DVS-V6464B/V6464M Network Router User Manual


 
6-7
ROUTING SWITCHER SYSTEM (E)
1990.10.12-15:42 S-BUS LINK DISCONNECTED
1990.10.27-09:28 STARTED BY BKS-R1601 Ver3.10 IN STATION 11
1990.11.03-05:31 STARTED BY BKS-R3204 Ver3.11 IN STATION 32
1991.01.14-13:51 MISSING REFERENCE SIGNAL IN STATION 1
1991.02.01-11:15 POWER SUPPLY UNIT B DOWN IN STATION 4
1991.02.04-06:11 X-POINT ERROR IN STATION 1
Error message
Error message
6-6. Function Check with Control Terminal
6-6-2. System status screen during the system operation
When a message is output to the S-BUS data link, the system status screen will display this message with
the date and time of occurrence. When an error occurs during the operation of the system, the error
message will be displayed.
Example of System Status Screen During System Operation
6-6-3. Menu item [W: SYSTEM STATUS LOG]
On the other hand, the menu item [W: SYSTEM STATUS LOG] can be used to call all the error informa-
tion stored in the RAM of the primary station, such as the content and time of errors in each station and
on the S-BUS circuit.
Operating procedure:
1. Turn on the power supply of the primary station to automatically start up the system status screen.
2. Press [Ctrl] _ [X] to display the menu screen.
The password will be requested if it has been set. Input the password using the numerical and alpha-
bet keys, and press [Return] or [Enter] .
3. Select the menu item [W].
4. __ more __” will be displayed at the bottom of the screen if all error contents cannot be displayed
on a screen.
Press [SPACE] to display the next error content. “__ end __” will be displayed when all error
contents have been displayed.
5. Press [Ctrl] _ [E] to return to the menu screen.
6. Press [Ctrl] _ [X] to return to the system status screen.